SPECIAL OFFERS

All(65)

SPINNING MACHINES

Blow room(3)
Carding(2)
Combing/Drawing(2)
Flyer/Ring spinning(5)
Hank Reeling(2)
OE Spinning(1)
Winding/Twisting(12)
Yarn Singeing(0)
All(28)

WEAVING MACHINES

Accessories(1)
Air jet looms(9)
Jacquard Looms(2)
Label looms(0)
Prep. Weaving(3)
Projectile Looms(0)
Rapier Looms(10)
Water Jet Looms(3)
All(34)

FINISHING MACHINES

Fabric dyeing(1)
Fabric finishing(11)
Fabric Stentering (3)
Fringeing (0)
Printing(0)
Shearing/Reasing(2)
All(17)

YARN DYEING MACHINES

Cone dyeing(2)
Hank dyeing(2)
Steaming Machines(1)
All(6)

KNITTING MACHINES

All(2)

SYNTHETIC TWISTING/TEXTURIZING

All(1)

WOOLS MACHINES

All(4)

COMPLETE TEXTILE PLANTS

All(12)

OTHER MACHINES

Embroidery machines(4)
All(20)

EARTH MOVING MACHINES

All(1)

NEW MACHINES

All(1)

SILK INDUSTRY MACHINES

All(1)

SPARE PARTS LOT

All(0)

WOOD INDUSTRY

All(0)

All Machines



#37.831


NO. 1 Stenter machine Make Bruckner Flat stenter, with 5 chambers Entrance zone with Vertical chain Suitable for Knitted fabric/cotton/ worsted light fabric Working on top quality high fashion knitted fabric Machine Completely reconditioned like new in 2007 Machine of Year 1987 Looks like new With entrance Batch with Bianco electronic weft straightener 2005 with Working width 220cm with Chambers oil heat element Chain Pin and clip type with Overfeed, three fingers guide. Screen Display Exit polishing Cylinder Motor New type AC with inverter Exit Batch or plaiting Cooler zone at exit Machine Running on Mill floor Oil heated

 


Printable Version

Check Availability

Bruckner 37.831

#37.558


NO. 1 STENTER MAKE BRUCKNER, Multi layer year 1995 Reconditioned in 2008 5 plus 1 passages, working width 2200 mm, Oil heated, new chain, in excellent condition, entrance batch, Delivery Plait weft straightener Electronic Mahlo RFMC 94H With Display and Video of exit with Conveyor belt for light fabrics Pins and clip Side Guides EL electrical RH and LH with selvedge cutter, Temp max 210-220 °c suitable for knit fabric and worsted fabrics Exit cooler zone with Mahlo Gravimat Motor AC with Inverter Control panel working speed 40/60 mtrs min Front and rear control commands voltage 380V 50Hz.

 


Printable Version

Check Availability

Bruckner 37.558

#36.943


NO. 1 CONTINUOS WASHING LINE FOR SILK MEZZERA 4 tanks + 1 impregnation tank BIANCO Entry fabric guides.

 


Printable Version

Check Availability

mezzera 36.943

#36.796


NO. 1 SHEARING MACHINE MAKE LAFER MODEL CMS-2 YEAR 1991 double shearing table 1900 mm width 2 groups 21 knives per each group exit by folder automatic lubrication of knives working on wool/worsted/wollen fabric

 


Printable Version

Check Availability

lafer shearing 36.796

#34.486


NO. 2 CONE DYEING MACHINES MAKE MASTER MODEL BM200 capacity 200 Kg year 1967/70 NO. 2 CONE DYEING MACHINES MAKE POZZI MODEL DNC 1120 AT capacity 200 Kg year 1965 NO. 1 CONE DYEING MACHINES MAKE MASTER MODEL AN 100 capacity 100 Kg year 1968 NO. 1 CONE DYEING MACHINES MAKE POZZI MODEL BDC 1120 AT capacity 100 Kg year 1965 NO. 1 CONE DYEING MACHINES MAKE MASTER MODEL BM 300 H capacity 400 Kg year 1973 NO. 1 CONE DYEING MACHINES MAKE MASTER MODEL AM/FR 7 capacity 40 Kg year 1991

 


Printable Version

Check Availability


#34.483


OFFER NO. 1 Overflow Make Maibo 3+3 tubes year 1988 NO. 1 Overflow Make Maibo 1+1 tubes year 1987 NO. 2 Overflow Make Maibo 25 Kg year 1988 NO. 1 Overflow Make Maibo 1+1 tubes year 1989 NO. 1 Overflow Make Maibo 4 tubes year 1990 NO. 2 Overflow Make Tessinox model RCL/25 for samples 15 Kg year 1984

 


Printable Version

Check Availability


#34.471


NO. 1 STEAMING MACHINE MAKE SALVADE MODEL MICROVAP 30 HU year 1997 table width 2200 mm chamber steam heated + gas burner Machine Like New - Very rarely used

 


Printable Version

Check Availability

steamer Salvadè

#33.547


NO. 01 STEAMER MAKE OBEM Atmospheric pressure, year 2000, equipped with steam maker Carel and with electrical panel.

 


Printable Version

Check Availability

33.547 obem

#32.704


NO. 1 Hydro-extractor for cones Dettin Model Berta 24 year 1987 NO. 1 Hydro-extractor for cones Dettin Model Berta 24 year 1989

 


Printable Version

Check Availability


#32.701


NO. 1 Dryer for cones Master Model ASM 502 M Aste 50 + 50 year 1984 NO. 1 Dryer for cones Master Model ACM 48 Aste 48 year 1984 NO. 1 Dryer for cones Master Model ACM 70-1 Aste 88 small cones year 1971 NO. 1 Dryer for cones Master Model ACM 48-1-G Aste 48 Year 1986

 


Printable Version

Check Availability


#32.692


NO. 1 OPENER CORINO IN LINE WITH DRYER ALEA

 


Printable Version

Check Availability


#32.689


NO. 1 CONTINUOS WASHING RANGE ARIOLI TYPE V15 for preparation and washing after printing. Cylinders height 200 cm Max fabirc width 180 cm Min fabirc width 90 cm adjustable speed 4/40 m/min Machines composed by: ENTRANCE: No. 4 Washing tanks V15 cylinders diam. 150 mm, max. fabric content 18 mt tank equipped with water levers water pump 100 m3/h direct steam heating With Foulard 2 cylinders covered by synthetic rubber motorized. No. 1 Washing tank V15 cylinders diam. 150 mm, max. fabric content 18 mt tank equipped with water levers water pump 100 m3/h direct steam heating With Foulard 10 T 2 vertical cylinders diam. 240 mm covered by synthetic rubber motorized. No. 1 Centering device at entry regulated by photocells No. 2 Temperature checking device including heat exchanger powered 6 ATM and temperature detector pmenumatic valve No. 1 Self cleaning filter with rotating disk Machine working with: - water 2/3 Atm pressure - saturated steam 6 Atm - Voltage 380V 50Hz - compressed air 10 Atm

 


Printable Version

Check Availability


#30.802


NO. 1 Foulard Make Kuster working width 1800 mm Year 1990 with oil pump with two cylinders squeezers exit plaiter

 


Printable Version

Check Availability


#30.799


NO. 1 Biancalani Airo 1000, Year 1990 working condition with 600 meters fabric cotton fabric finishing for making softness to fabric oil heated with exhaust heat exchanger Price loaded 58.000

 


Printable Version

Check Availability


#30.787


NO. 1 Washing Range Open width Make Goller width working 2000 mm with 9 tanks entrance batching with System for fabric cleaning TVE suction with Sqeezers each tank exit Control Panel Termo Electronica CT 401 Heat exchangers Pozzi Filters Beta Year 1994 Machine running controlled thr a display and large panel

 


Printable Version

Check Availability

goller 30.787

#30.181


RAISING/SHEARING PLANT MAKE LAFER YEAR 1988 COMPOSED BY: NO. 1 LAFER RAISING MACHINE MODE GRI-90 DUPLEX NO. 1 LAFER RAISING MACHINE CHARDON WORKING IN MATCH WITH NO. 1 LAFER SHAERING MACHINE MODEL GLC NO. 1 LAFERSHEARING MACHINES MODE C1C working width 1900 mm. NO. 1 LAFER SHEARING MACHINE MODEL CMS-2, working width 1900 mm, velveting brushes, autmatic controller, semiautomatic device for pile height, microprocessor for data insertion of items. NO. 2 LAFER SHEARING MACHINES ON LINE MODEL CMS, working width 1900 mm, year 1994.

 


Printable Version

Check Availability

shearing/raising 30.181

#30.016


NO. 1 Stenter Frame Make Santa Lucia model year 1997 width 1800 mm, with 7 chambers, with entrance Foulard Beta 3 cylinders, with coating tank with double coating, with delivery squeezers,with weft straigthner mech make Santa lucia Gas Metano Heated with entrance chain with selvedge guide Clip type chain - (pins can be fitted -chain made for both) Delivery Cooler Control panel With delivery Big batch Roll Delivery with fabric accumulator to remove big roll without stopping machine Two exhaust fans on chambers With all valves and connections 380v 50hz

 


Printable Version

Check Availability

stenter santa lucia



Back