Offer : COMPLETE PLANT FOR PRODUCTION OF SILENCER (AUTOMATIC) FOR CARS AND COMMERCIAL VEHICLES MAKING 2000 SILENCERS PER DAY (8 HOS) WITH 200 TYPES OF SILENCERS PER VARIOUS CARS

Production Models: For 200 car models diesel and petrol international range like Volksvagen, Mercedes, FIAT, Ranault, Opel, Toyota, Nissan, Ford, BMW. 

Production moulds: various 80 moulds and fixtures

Wostes: around available 30/40

Offer : LARGE CAPACITY A. THIBEAU SCOURING LINE OFFERED FOR SALE

A recognised wool scouring facility in the heartland of the wool processing City Biella, Italy, known for processing a wide range of wool microns: merino, half breed and carpet types, offer for sale their A. Thibeau. The plant is currently in operation pending sale and is available for interested parties to inspect, please, contact Prinitex, Italy, or Officina Impianti Tessili Enzo Grillo.

Offer : Petrie Wool Scouring Machine

LARGE CAPACITY PETRIE AND MC NAUGHT SCOURING LINE OFFERED FOR SALE

Offer 3181 : No 1 Printing machine

Make : Heidelberg
Model : sm 74-4-p-h

year 2000
Size: 52 x 74 cm     
Ca. 82 mio. prints   
High pile delivery
Perfecting 4/0, 2/2   
CPC1-04
CP Tronic
Autoplate automatic plate changing system
Alcolor dampening
Technotrans cool- and circulation device
Automatic inkroller-washup device
Automatic blanket-washup device
Automatic impression cylinder washup device
Steelplate in feeder and in delivery
Electronic side lay control
Double sheet control
Decurler
Grafix Alphatronic 200 powder spray

Offer 3179 : No 1 Vertical Turret Lathe machine

Make : titan

Model : sc43

Table Diameter                               157.48"
Maximum Work Diameter             169.29"
Maximum Work Height .                 78.74"
Vertical Ram Travel                        47.24"
Vertical Travel Turret Head             29.92"
Ram Head Swivel              +/- 35 Degrees
Turret Head Swivel            +/- 35 Degrees
Table Speeds                     1-90 RPM
Table Weight Capacity      20 Tons
Machine Weight                67 Tons

Offer 3178 : No 1 CNC MACHINE

Make : WHQ
Model : 13

Diameter of spindle 130 mm, ISO 50
X 3500 mm
Y 2500 mm
W 1250 mm
Z 800 mm
Spindle motor 37 kW
Spindle revolutions max 3000 rpm
Table 1800x2500
Tools changer for 60 tools
Cooling trough spindle

Offer 3177 : No 1 Binding machine

Make : Muller martini
Model : Pony 5

Year : 1971
revisioned in 2006
Condition Very Good
In production
Block thickness 40 mm (1.57")
 1.700 to 4.000 cycles/h.

Offer 3176 : No 1 hydraulic press

Make : Loiresafe
Model : EDIMC 1600

Year : 2000
Capacity adjustable 160 to 1600 t
Table dimension 4700 x 2500 mm
Ram dimension 4700 x 2500 mm
Stroke 1600 mm
Shutheight (S.D.A.U.) 2400 mm
Approach speed 300 mm / sec
Working speed till 400t constant 70 mm / sec
Working speed 900t constant 22 mm / sec
Working speed 900t to 1600t
automatical adjustable 13 to 22 mm / sec
Return Speed 200 mm / sec
Cushion capacity adjustable 60 to 600 t
Cushion surface 3700 x 1900 mm
Stroke 500 mm
Ejector in ram adjustable 12 to 120 t
Ejector stroke 150 mm
Main motor 254 kW
Main voltage 400 V
Main frequency 50 Hz
Total weight approx. 230 t

Offer 3174 : No 1 New Sheet Metal Machine

Make : Mandelli
Model : CH4010 CN PRG 910A

Cuttin lenght : mm 4040
max cutting thickness : mm 10
throat deph : 500 mm
Variable angle regolation
Motorized back gauge  mm 1000
motorized blade clearence adjustment

Offer 3173 : No 1 Milling machine

Make : Induma
Model :  3

1500X300 mm
Elbo on 3 axes

Offer 3172 : No 1 Grinding Machine

Make : Favretto

Model : MC130

Year : 1995
CNC auto control
electromagnetic chuck
Grinding lenght : 1300 mm
Longitudinal stroke : 1380 mm
Width  : 600 mm
Max weight on table : 1300 kg
Power Wheel motor : 15 hp - 11 kw
Total power : kw 20
Machine weight : 8800 kg

Offer 3171 : No 1 Milling machine

Make : Arno

Table : 1600x360 mm
Vertical head :  ISO 50
Speed : 12
Rounds :50-1500 RPM

Offer 3170 : No 1 Electroeroison tuff

Make : Sparcatron
Model : sm24

Dispay  on x y axis
z: 260 mm
x: 420 mm
y: 340 mm

Offer 3167 : No 1 Sheet Metal Machine

Make : Maxima
Model : 40- 4/6

year 2007
cutting lenght mm. 4050
distance between frames mm. 4150
gap mm. 500
cutting capacity  R= 42 Kg/mmq.
nominal thickness mm. 4
nominal angle mm. 6
nominal cutting angle gradi 1,30°
max cutting angle gradi 2,30°
cutting angle degrees gradi 0,30°/2,30°
/strokes/min al min. 10/22
/backgauge stroke mm. 750
min motor power HP. 12,5
Voltage Volt 400
Frequency Hz. 50
Fases N. 3

Offer 3169 : No 1 Radial Drill

Make : Sidermac
Model : rb70-1600

Drill capacity : 70 mm
completed with cube

Offer 3168 : No 1 Radial drill

Make : SASS

Model :TRM 2200

Drilling capacity : 80 mm
Distance beteween spindle column 2200 mm
Hydraulic Unclamping on column and head
New electric system

Offer 3166 : No 1 Milling machine center

make : Famup

model : CLV 80 Siemens system 3

 year:  1990
Strokes :
stroke x : 970 mm
stroke y : 680 mm
stroke z : 480 mm
table: 800x400 mm
max wight on table : 800 kg
spindle taper : ISO 40
power spindle motor : kw 9
spindle speed : rpm 4000
tool storage capacity : 24
4 axis hydraulic rotary table TABONI dia 300mm

Offer 3164 : N.1 MILLING MACHINE CENTER

Make: FAMUP
MOD. FCN 500/12

CNC SIEMENS 2/3
longitudinal stroke X 500 mm
trasversal stroke Y 300 mm
vertical stroke Z 200 mm
distance between table-spindle nose 200-620 mm
table 800x345 mm
spindle taper ISO 30
CNC/spindle speed 130-3000 rpm
power spindle motor 2,5/3,6 kW
  tool magazine capacity 12 positions

Offer 3163 : No 1 Bending rolls

Make : Faccin
Model : 4HC1/2500- 25/20 4 ROLLS HYDRAULIC  25mm x 2.5m

Year :  1999
 UPPER ROLL DIAMETER            360 mm
- LOWER ROLLS DIAMETER       300 mm
- N° OF ROLLS                                 4
- MAX. WORKING THICKNESS   25 mm
- MAX. WORKING THICKNESS (WITH TOTAL STRESS RAISER) 20 mm
- MAX. WORKING WIDTH 2500 mm
- TOTAL POWER                           30 Kw
FACCIN 4HC1/2500- 25/20
4 ROLLS HYDRAULIC PLATE BENDING MACHINE

Offer 3162 : No 1 Threading machine

Make : Seny
Model : d44eh

PRESSURE POWER 100 KN
MIN DIAMETER 2,5MM
MAX DIAMETER 40MM
PICH 3,5MM
MAIN MOTOR 3 kW
MACHINE UNDER POWER IN VERY GOOD CONDITION,
HYDRAULIC MODEL WITH TILTING DIE

Offer 3161 : No 1 Turret CNC

Make:   PITTLER
Model:  pv630

year :  1994
MAX SWING DIAMETER          630MM
MAX TURNING DIAMETER     500MM
DISTANCE BETWEEN SPINDLE NOSE AND TOOL CARRIER 910MM
X STROKE 500MM
Z STROKE 450MM
MAIN MOTOR POWER 52 KW
Controller:    SIEMENS SYSTEM 3

Offer 3104 : No 1 Fork lift

Make : Engly

capacity : 1200 kg
year: :         1995
Forks:        included

Offer 3153 : No. 1 Compressor with 500 liters tank and essicator

Make : Balma Viss
Model : VS 30

Year 2003
Power : 22 kw
Pressure exercise  :  10 bar
Noise : 72 db
Power supply unit : 400v/50hz
Weight :  485 kg

compressed air tank :

 Assembly :  On the ground
Position    : vertical
Exercise :   outside temperature                       Color :   blue (ral 2015)

Offer 3142 : No 1 Injection Molding Machine

Make :   STORK REMU
Model:   HMSY 1100,EUROMAP DENOMINATION 11000H/1117

YEAR:   1987 
SCREW DIAMETER :   120 mm
APPROX. SHOT WEIGHT :    5470  gr.  (POLYSTYRENE)      

MOULD CLAMPING FORCE     11000kN  
MAX.INJECTION PRESSURE:      1850 bar
CLEARANCE  BETWEEN
TIE  BARS (OXV)               1100 x 1100 mm
MOV.PLATEN STROKE:                              1500 mm
MIN-MAX MOULD THICKNESS:               500-1200 mm
CONDITIONS  : RUNNING

Offer 3141 : No 1 Injection Molding Machine

Offer 3140 : No 1 INJECTION MOLDING MACHINE

MAKE : STORKREMU
MODEL : HMSY 850/4000  , 

EUROMAP DENOMINATION 8500H/7298
YEAR:                  1988 
SCREW DIAMETER :                                  110
INJECTION CAPACITY  .                            4316  gr (POLYSTYRENE)
                                                        
MOULD CLAMPING FORCE:                     8500 kN
MAX. INJECTION PRESSURE:                   1600 bar

CLEARANCE  BETWEEN
TIE  BARS (OXV)                                          950 x 950mm
MOV.PLATEN STROKE:                              1250 mm
MIN-MAX MOULD THICKNESS:               400-1000 mm
CONDITION :  UNPLUGGED

Offer 3139 : No 1 printing machine (1 color)

Make : Heidelberg
Model :  Kord 64

Offer 3138 : No 1 (5 color) Printing machine

Make: Heidelberg
Model : Sm 52-5

year 1997
Size: 370 x 520 mm
Straight machine
Alcolor 
Technotrans cooling system
Autoplate, Preset
CPC 1.04
CP TRONIC
All washers

Offer 3137 : No 1 (4 color) Printing machine

Make : Heidelberg
Model : SM 52-4

year 1996
Size: 370 x 520
Ca. 62 Mio. prints
Plus Version
Autoplate, CP-Tronic
CPC 1-04, Alcolor
Technotrans Alpha refrigeration and circulation
Auto. roller, blanket, imp. cylinder wash-up device
Powder sprayer
Low pile delivery

Offer 3135 : No 1 Surface Grinder machine

Make :  Alpa
Model : RTL 1000

Working table size :                        1000x500mm
Longitudinal travel x axis                  1150 mm
Max. grinding length                        1000 mm
Cross travel y axis                          560 mm
Distance table / spindle axis            620 mm
Max grinding height                         420 mm
Feed rate x axis                             1-35  m/1
Wheel dimensions                         400x127x175 mm
Spindle motor power                       12 hp
Magnetic plate dimension                500x700 mm
year                                                   1990

Offer 3134 : 1 radial drilling machine

maker : sass

model : trl 1600

Drilling capacity: 40 mm
spindle center distance: 1600 mm
Spindle: Morse 4
Standard accessory:  Hydraulic unclamping - Centralized control
  

Offer 3133 : 1 gear grinding machine

Maker : Niles

Model : zstz35

Max. grinding diameter    3500 mm
Min. grinding diameter   350 mm
Module min/max    4/25 (34)
Number of teeth min/max   16/600
Max. helical angle    35°  right and left
Pressure angle min/max    14°/31°
Max. length of tooth if  B-0°   710 (950) (1200) mm
Max. weight of goods    30 000 kg
Diameter of grinding disc min/max  300/400 mm
Bore of grinding disc    127 mm
Width of grinding disc   32/40/50 (63) mm
Speed of grinding disc    2150 min-1
Table diameter    2000 mm
T  - key ways on the table   8 x 22H12mm
Bore diameter of table   450 mm
Length of table bore    2000 mm

producer      NILES
Year of manufacturing   1990
Príkon      39 kW
Weight of machine    46 500 kg

Offer 3132 : 1 gear testing machine

maker : klingenberg 

model : PNC 200

 max. Gear dia. 2000 mm
Modul 1-30
max. weigth workepice 10000 kg
 

Offer 3131 : 1 hydraulic metal press braker

maker:  COLGAR
model: 30/125

Bending lenght: 3050 mm
Gap: 500 mm
Max capacity: 125/140 ton
Backgauge X axis stroke:  Motorized 1000 mm
Overhauled  in 1997

Offer 3130 : 1 radial drilling machine

maker: invema
model: 50-1600

Drilling capacity:  50 mm
spindle center distance: 1600 mm
Spindle: Morse 5 - rpm 96-1400 - kW 9
Standard accessory:  Rotary cube 

Offer 3129 : 1 machine center

maker : kitamura

mode : mycenter 2/585

Strokes: x 585 mm - y 430 mm - z 460 mm
 Spindle head: ISO 40 - rpm 20-7000 - kW 7,5
Automatic tool changer :20 random
 Overhauled  in 2005     

Offer 3128 : 1 lathe machine

1 lathe machine
maker : goodway
model :  gcl 2

Strokes: x 150 mm - z 300 mm
Spindle head: ASA A2-5 - rpm 45-4500 - 7.5/11 kW
Spindle bore:55 mm
Tools station 8 positions

Offer 3127 : 1 milling machine

maker : heidenhain
model: 355

Strokes: x 500 mm - y 400 mmz 340 mm
Spindle head: ISO 40 - rpm 20-3000 - kW 6 

Offer 3126 : 1 milling machine

maker:  heidenhain
model: 155

Strokes: x 500 mm - y 400 mm - z 340 mm
 Spindle head: ISO 40 - rpm 10-3150 -kW 5,2
Overhauled in 2003

Offer 3125 : 1 milling machine

maker: HEIDENHAIN
model : tnc 135

Strokes: x 800 mm - y 450 mm - z 500 mm
Spindle head: ISO 40 - rpm 2000 - kW 
Standard accessory:  Rotary table

Offer 3124 : 1 milling machine

maker: huron
model : mu4
Year: 1982

Strokes: x 1100 mm - y 700 mm - z 500 mm 
Spindle head: ISO 40 - rpm 30-2066 - kW 9
Standard accessories: Inverter telemecanique HEIDENHAIN display on 3 axis

Offer 3073 : 1cnc machine

maker : mori seiki

Model :  RL 253 

:: Year :  2000 
  Dimensions : 
    Weight 8000 Kg 
    Length 2.4 m 
    Width 2.32 m 
    Height 2.5 m 
 Type of CNC :  MSG 803 
Max turning length :  180 mm 
Max. turning diameter :  340 mm 
Diameter above transversing slide :  250 mm 
Diameter in the gap :  540 mm 
Spindle motor :  22/15 kW 
 Spindle nose :  ASA 8 
 Spindle bore :  88 mm 
Turning speed :  35-3500 rpm 
 Number of turrets :  2x12 
Motor Kw 15/11
Machine with Auto feed and Delivery
Still on mill floor working

Offer 3072 : 1 cnc machine

maker:  mori seiki

model : rl series 2500

·Mass-production machines that generates more parts in the same space thanks to 2-process simultaneous machining.
·Using the gantry-loader system vastly improves productivity.

•2 spindle 2 turret

Lineup
RL SERIES
RL2500
Applicable chuck size 10-inch
Max. turning diameter
mm (in.) , 2: 340 (13.3)
Standard turning diameter
mm (in.)No.1, 2: 250 (9.8)
Max. turning length
mm (in.) <loader can handle lengths up to 120 mm (4.7 in.)>
X-axis travel
mm (in.) 170+20 (6.7+0.8)>
Z-axis travel
mm (in.)  265 (10.4)
Spindle speed range
(min-1) No.1, 2: 35—3,500
Number of tool stations , 2: 12
Gantry loader with 14 pallet Moriseiki Model LG 10
Year 2003/04

Offer 3071 : 1 CNC LATHE MACHINE

MAKER :  MORI SEIKI

MODEL :  RL-203

Turning Model Spex Mori Seiki RL-203     

DESCRIPTION 20 (opt 30)-HP Twin Side-by-Side Parallel Spindle,
Twin-Turret CNC Lathe Chucker
Year  2000-  Travel X asis mm 1.2:130 <120- 10
Z axix mm No 1.2:150

The Mori Seiki RL Series features dual side-by-side parallel spindles and dual tool turrets. This machine is designed for completing first and second turning operations or for high production single operation turning processes. Automatic loading and unloading of workpieces may be accomplised with overhead loaders. A workpiece may be loaded to the first spindle, then turned then automatically and externally transferred to the second spindle for second operation turning.
Turning diameters up to 9.4 inch are possible on both spindles and turning lengths of up to 5.9 inches are also possible. A standard chuck diameter of 8 inch is equipped on both spindles. Main spindles are equipped with 4500 spindle RPM. And both turrets are equipped  12 tools.

Offer 3123 : 1 MOULDER SCM P75 5 SPINDLES

 useful working sizes 180x120mm
- automatic feeding of the pieces with top motorized rollers
- variable feeding speed from 3 to 21 mt/min
- infeed plane lenght 2000mm
Spindles:
- bottom hp 5,5
- right
- left (2 vertical spindles with single motor hp 10)
- top hp 5,5
- universal hp 5,5
 
good conditions

Offer 3122 : 1 moulder SCM model P75, version with 4 spindels

- useful working sizes 180x120mm
- automatic feeding of the pieces with top motorized rollers
- variable feeding speed from 3 to 21 mt/min
- infeed plane lenght 2000mm
Spindles:
- bottom hp 5,5
- right
- left (2 vertical spindles with single motor hp 10)

- top hp 5,5

good conditions

Offer 3121 : 1 Multirip saw Gabbiani model SA350

- feeding chain 300mm wide
- useful cutting height 120mm
- max. blades diameter D=350mm
- motor power to be check (estimation: 30 or 40 HP)

good conditions

Offer 3120 : 1 BOTTOM CUT OFF SAW OMGA model t620

   blade D=500mm
- pneumatic fast blade up-down stroke
- motor hp 5,5 , volt 380

good conditions

Offer 3119 : Pendulum cut-off saw OMEC model SP400

- motor hp 4
- blade D=400mm
- with 2+2 mt of benche

good conditions

Offer 3118 : 1 Veneer guillotine CASATI CERVA

- useful cutting lenght 2600mm
- mechanic pressor & blade movement

good condiitons

Offer 3117 : 1 hot press pellegrini

Offer 3116 : Wide belt sander SCM model CL110 , 1100mm

 1° belt with calibrating roller in hard rubber
- 2° belt with pad
- belt motors hp 20 + 15 , volt 380
- feeding carpet with variable speed
- pneumatic self-centering of the carpet

good conditions

Offer 3115 : 1 semiautomaric boring machine scm fm29s

 -1 head with 29 chucks, screw attachments
- working from vertical bottom and horizontal

good conditions

Offer 3114 : 1 Single sided edge bander SCM model B4L

- wide feeding chain, with rubber sliding-blocks
- useful working heigth from 10 to 60mm
Working groups:
- bottom glue tank
- loader and shear for coils (pvc, veneer)
- loader for solid wood listels up to 15 mm
- pressure zone with 3 rollers
- tiltable end-cutters hp 0,5 + 0,5
- tiltable trimmers hp 2 + 2

good conditions

Offer 3112 : 1 CNC LATHE MACHINE model MORI SEIKI SL-O-H

YEAR                                                 1983
Centre height                                            225 mm
Spindle bore                                          43 mm dia
Spindle speeds                                       0-6000 rpm
Max. turning diameter                              100 mm
Turret head                                          8 stations
Total motor power                                       7,50 kW
Voltage                                                400 Volt
CNC control: Fanuc 3 T                                   2 axes                                    
Rapid feeding                                    
Length 1600 mm, Width 1300 mm, Height 2000 mm, Weight 2000 kg

good condiitons

Offer 3111 : cnc lathe machine model Maier ml20b

year 2001
Spindle speeds                                       0-8000 rpm
Spindle bore                                              20 mm
No. of rotating stations                                 3 pcs.
Spindle speeds rotating tools                         8000 rpm
X-axis travel                                           265 mm
Z-axis travel                                           230 mm
Have been under power in 15900 hours
Control FANUC 18 i - T
Main motor power 3,7 Kw
Max. power 16 Kw

Equipped with:
Collet attachment - Barfeedmagazin
Full C-Axe - Subspindel
Partcatcher
Synchronspindle - Tool Locker
Chip Conveyor - Coolant
Service Tools

Width 1700 mm, Height 2000 mm, Weight 5000 kg

very good conditions

Offer 3110 : cnc lathe machine gildmeister nef 1020

model : gildmeister nef 1020
year :  1986
Distance between centres                                2000 mm
Centre height                                            500 mm
Swing over bed                                      1020 mm dia
Swing over cross slide                               600 mm dia
Spindle bore                                         128 mm dia
Spindle speeds                                       5-1120 rpm
Turret head                                          4 stations
Total motor power                                         50 kW
Voltage                                                400 Volt
CNC-controlled, EPL 2 Dialog, 2 axes
Colour graphic
Electric pinoldock
Central lubrication
Counter: hours 15300
Gearbox has been renovated with new gears and bearings in 2008
Accessories:
Centre chuck                                         400 mm dia
Lathe chuck                                          800 mm dia
Steady rest                                          280 mm dia
Revolver Centre
Jaws
Chip conveyor                                    
Coolant                                          
Manual. Electrical wire diagram. CNC programming book
THIS MACHINE ARE WORKING LIKE A NEW MACHINE
Weight 9000 kg

very good conditions

Offer 3109 : Lathe cnc machine WEILER, TYPE E 30

year                                      1992                                   
Distance between centres                                 650 mm
Swing over bed                                       320 mm dia
Swing over cross slide                               160 mm dia
Spindle bore                                          40 mm dia
Stepless spindle speeds                              1-3000 rpm
Max. collet chuck                                     35 mm dia
Total motor power                                       5,60 kW
Voltage                                                       400 Volt

CNC control:                                     
Rapid feeding                                    
Accessories:
Centre chuck                                         200 mm dia
Steady rest                                          100 mm dia
Collets                                                  50 off

Multi-toolpost                                   
Various toolposts                                
Coolant                                          
Operation manual                     
Length 1650 mm, Width 1050 mm, Height 1650 mm, Weight 1000 kg

good conditions

Offer 3113 : Beam saw CASADEI model SEZ4000

1 beam saw casadei sez4000

 useful cutting lenght 4000mm
- useful cutting heigth 80mm
- electonic pusher, no pincers
- electronic control ESA model DC3/GR
- main saw blade motor hp 7,5
- scorer motor hp 1,5
- 4 frontal tables

Very good conditions

Offer 3108 : Lathe cnc machine Weiler e50

1 USED CNC-LATHE   
                
MANuF. WEILER/VÖEST/ TEACH-IN, TYPE E 50
 year       1994                 
Distance between centres                                1000 mm
Swing over bed                                                  570 mm dia
Swing over cross slide                                      340 mm dia
Spindle bore                                                     70  mm dia
Spindle speeds                                                 1-2500 rpm

Rapid feeding

Total motor power                                         15 kW
Voltage                                                       400 Volt                                         CNC control: Manuf.: Simens Sinumerik 805                2 axes

Colour graphic                          
Accessories:
Chip conveyor                                    

Coolant

Toolholder with efforts MULTIFIX                                        
Length 3000 mm, Width 2000 mm, Height 1800 mm, Weight 2800 kg

Offer 3107 : Heavy duty lathe cnc machine Kramatorsk model 1a680-8
 year             1972.
Distance between centres – 8000 mm;
Faceplate diameter – 3150 mm;
Working diameter:
Over bed – 3150 mm;
Over support – 2500 mm;
Machines is in working condition.

Offer 3106 : CNC VERTICAL TURRET LATHE MACHINE

Double Column TITAN SC 43, YOP 1984.
Lathe was mounted only in 1993. New.
 
Faceplate diameter 4000 mm 
Swing diameter 4300 mm 
Turning height 2000 mm 
Workpiece weight 75 t
Turning speed range - faceplate 0 - 90 U/min 
Main drive motor 60 kW 
Side head - vertical travell 1100 mm 
Side head - cross travell 760 mm 
Max ram stroke 760 (rechts, Revolverkopf) mm 
Max ram stroke 1200 (links) mm 
Swivelling of the turret head, right/left 35 ° 
Rapid travers - turret head, hor./vertical 2500 mm/min 
Rapid traverse of cross-rail 400 mm/min 
Weight of the machine ca. 56000 kg.

Offer 3103 : Rotatory spraying machine for wood Furniture industry

Offer 3096 : kato crane KR22H-II

year                                       2000
hours                                   4642
km                                        37128
Main Boom Length                28 Metres 
Fly JIB Length                     5.4 – 8.2 Metres

Engine             MITSUBISHI 6D16
Hook Blocks    Main and Auxiliary Hook Block 

Extras Capacity: 25 Ton at 2.5 Metre Radius.

22 Ton at 3.0 Metre Radius

Perfect conditions

Offer 3095 : kato crane kr20hl

brand new

Main Boom Length            28 Metres 
Fly JIB Length              7 – 11.4 Metres 
Engine              MITSUBISHI 6D16-TE2B with Turbocharger
Hook Blocks Main and Auxiliary Hook Block
Extras Capacity:       20 Ton at 3 Metre Radius

Perfecto conditions

Offer 3094 : kato crane mk75mv

anno                                     2001
km                                       27190

Main Boom Length           21.5 Meter
Engine                               MITSUBISHI 6D16
Hook Blocks Main & Auxiliary Hook Blocks
Extras CHASSIS      : MITSUBISHI Model FK627E. TYRES:       90% ALL ROUND - BRIDGESTONE

Perfect conditions

Offer 3093 : Kato crane nk200-v

year                                  1992
hours                                3004
km                                       39574
Main Boom Length       31 Metres 
Fly JIB Length           8 Metres 
Engine                       MITSUBISHI 6D24
Hook Blocks Main and Auxiliary Hook Block 
Extras Chasis: MITSUBISHI KC-KV207M.CAPACITY: 25 Ton at 2.5 Metre Radius.20 Ton at 3.0 Metre Radius.

Perfect conditions

Offer 3092 : Kato crane NK200H-V

year                                   1998
hours                                4968
km                                     72782
Main Boom Length           31 Metres 
Fly JIB Length               8 Metres 
Engine                            MITSUBISHI 6D24
Hook Blocks Main and Auxiliary Hook Block 
Fully Serviced and Inspected
Extras CHASSIS: MITSUBISHI KC-KV207M. Capacity: 25 Ton at 2.5 Metre Radius. 20 Ton at 3.0 Metre Radius

perfect conditions

Offer 3091 : crawler crane HITACHI CX500

year                                     2002
hours                                  1561
Main Boom Length         43 Metres + Auxiliary/Short Jib
Engine Make & Model       HINO H07CT Turbo Charged Engine
Hook Blocks                      50Ton, 15 Ton & hook
Extras Capacity:                  50 Ton at 3.8 m Radius

Perfect conditions

Offer 3090 : crawler crane IHI CCH700

YEAR :  2010

Main Boom Length 45 Metres + 1 Metre Auxiliary/Short Jib
Fly JIB Length        18 Metres  
Engine :          Cummins QSB6.7 Turbo Charged
Hook Blocks        45Ton, 15Ton, 7 Ton Ball Hook 
Condition            New & Unused. Fully Inspected
Extras Capacity:       70 Ton at 3.8 Metre Radius

Perfect condiitons

Offer 3089 : crawler crane Priestman Lion 40t

Year :  1983

boom : 37 m

very good conditions

Offer 3088 : crawler crane sumitomo sc800-1

Brand: SUMITOMO
Type: SC800-1
Year: 1998
Capacity: 80 ton
Mainboom: 45m
Fly jib: 13,5m

GOOD CONDITIONS

Offer 3085 : komatsu excavator pc300

komatsu excavator pc300

year:  1992

a/c installed

train :  80%

very good conditions

Offer 3084 : crawler excavator komatsu pc300

komatsu excavator 

year :           1995

hours :        19000

A/C installed

komatsu motor

good conditions

Offer 3083 : Crawler crane cobelco ck90UR

Serial Number 171

Year 1997

Hours 5168

4.9 ton max lift

15.5m max lift

Steel Tracks with rubber pads % remaining

 CE Certified

Good all round condition

Offer 3081 : crawler crane HITACHI KH180-3

Offer 3081 : crawler crane HITACHI KH180-3
Crawler crane HITACHI KH180-3 in very good condition, ready to work. YOM: 1993. Working hours: 5.000 h approx. CAPACITY: 50 t. Lattice boom length: 30 mt. Counterweight: 15.9 t. Diesel engine, power 150 Hp. Kruger safety load indicator. 2 winches. Free fall option. Max line pull : 14 t. Joystick steering. Undercarriage at 80% good. Original European machine. Condition: VERY GOOD

Offer 3065 : PIZZA Line production process year 2000

"PIZZA" LINE PRODUCTION PROCESS
Production line "2" : beginning of the activities year 2000
Theoretical productive capacity 6000 pz/h

Production process description:

First, the dough is prepared according to the established recipe.
flour dosing system ( CEPI rif inv n° 104 )
water dosing system ( TECNOMAC rif inv N ° 106 )
kneading machine ( PIETROBERTO rif inv n° 103 bis )
Then, the dough is transferred with a 2 arms elevator ( PIETROBERTO rif inv n° 136 ) in the hopper of the splitting machine ( KONIG rif inv n° 136 )
that automatically generates dough balls of established weight and transfers them on covered with food-grade cloth ( SIMER rif inv n° 147 )
for the maturing in the rising cell (BAMAK rif inv n° 172 ) where temperature and humidity are electronically monitored.
After the rising, the dough balls are mashed several times using a crossed lamination system ( SIMER rif inv n° 173 )to obtain disk-shaped dough with thickness and diameter desired. There is the option to obtain rectangular shaped pizza with a system that always starts from a disk-shaped dough ( TMT rif inv n°174 ).
Tomato sauce, previously prepared in preparation room ( ALIMEC rif inv n° 110 ), is automatically dosed and spread (ALIMEC / MR INOX rif inv n° 175 / 176 / 177) on the dough.
For some particular kind of product, before the cooking at about 400 °C for 80" in gas oven ( BAMAK rif inv n° 181 )
with stone carrier boards, there is the option to dose some atomized oil on the dough to obtain a higher browning effect also increasing the taste ( rif inv n° 178 ).
Note : an option to the standard process is to transfer the dough from lamination to the oven without dosing and spreading of tomato sauce. At the entrance of the oven the dough is pierced with a roller ( rif inv n° dettaglio 178 ).
This kind of "white" pizza can be stuffed with tomato sauce sprayed immediately after the cooking ( rif inv n° 161 )
After the cooking, the pizza transferred on conveyor belts, enters the stuffing area where it is stuffed using automatic systems like the cheese dosing one ( ALIMEC/ZENNATO rif inv n° 162),
automatic cutters ( ALIMEC rif inv 163/164 )
or ingredients dosing systems ( ALIMEC rif inv n° 165/166 ).
This product enters the refrigerating tunnel ( FRIGOSCANDIA rif inv n° 184 ) where it reaches a temperature of about
- 18° C in 35 minutes.
At the exit of the freezing machine, the product is packaged with thermo-shrinking plastic film ( PFM rif inv n° 187 )
( SITMA rif inv n° 237 )
Then, with the primary packaging on, the weight is checked and the product passes under metal detector ( PRISMA
rif inv n° 196 - 197 ).
First, the product is put in a case ( CIEMME rif inv n° 200 e VARA rif inv n° 202 ) packed in boxes or bundled ( SOTEMAPACK rif inv n° 205 - 207 ) according to the technical sheet, then palletised and stored in freezing room.
MACHINERY ROOM
FOR REFRIGERATING SYSTEM (AMMONIA - NH3)
· BARON ( year of construction 1999 )
· EMICON ( year of construction 2006 )

Offer 3064 : Pizza line production process

PIZZA LINE PRODUCTION PROCESS
Production line "1" : beginning of the activities year 1994
Theoretical productive capacity 5000 pz/h

Production process description:

First, the dough is prepared according to the established recipe.
flour dosing system ( CEPI rif inv n° 104 )
water dosing system ( TECNOMAC rif inv N ° 106 )
kneading machine ( PIETROBERTO rif inv n° 103 )
Then, the dough is transferred with an elevator ( PIETROBERTO rif inv n° 146 bis ) in the hopper of the splitting machine ( KONIG rif inv n° 146 ) that automatically generates dough balls of established weight and transfers them in cloth little bowls for the maturing in a rising cell ( SIMER rif inv n° 147 )
After the rising, the dough balls are mashed several times using a crossed lamination system ( SIMER rif inv n° 148 ) to obtain disk-shaped dough with thickness and diameter desired.
Tomato sauce, previously prepared in preparation room ( ALIMEC rif inv n° 111 ), is automatically dosed and spread (ALIMEC rif inv n° 149 ) on the disk-shaped dough.
For some particular kind of product, before the cooking at about 400 °C for 80" in gas oven ( SIMER rif inv n° 151 ) with stone carrier boards, there is the option to dose some ingredients ( ALIMEC rif inv n° 150 ).
After the cooking step, the pizza on conveyor belts enters the stuffing area where it is stuffed according to the recipe with automatic systems ( ALIMEC - ZENNATO rif inv n° 153+155 e 154 ).
The product enters the refrigerating tunnel ( HEINEN rif inv n° 213 ) where it reaches a temperature of - 2 / - 5 ° C.
The refrigerating tunnel exits in an aseptic room.
The product is packaged in plastic trays in protective atmosphere (TIROMAT rif inv n° 215/216/217 )
After packaging in boxes, the product ( rif inv n° 223/224/225/226/227/228 ) is stored in refrigerated rooms.

Offer OFFER 3036 : PASTA PLANT

LONG PASTA LINES COUPLED TO DEDICATED PACKING STATIONS                               

LINE 1  BRAIBANTI type COBRA 1300, capacity 1.3 mt/hr (built 1976)                  

            Dimensions = L x W x H = 62.6 X 6 X 4.8 meters     

            Press (first 4 meters) : H = 6.3 meters

            Cutter (last 2 meters) : W = 7.9 meters

            Including 15 hours storage of dry pasta before cutter                    

PACK 1      Coupled for continuous operation with :                       

                  RICIARELLI packing station 55X500 gr packs/min (built 1981)            

                  Including metal detector and CAMA automatic boxing machine 20X500 gr (1991)                

                  Final net line capacity of packed and boxed pasta 1.050 kg/hr           

LINE 2  BRAIBANTI type COBRA 1000, capacity 1.0 mt/hr (built 1980)                  

            Dimensions = L x W x H = 48 X 4.5 X 4.8 meters     

            Press (first 4 meters) : H = 6.3 meters

            Cutter (last 2 meters) :W = 6.4 meters

            Without storage                    

PACK 2      Coupled for continuous operation with :                       

                  RICIARELLI packing station 35X500 gr packs/min (built 1987)            

                  Including metal detector without automatic boxing machine              

                  Final net line capacity of packed and boxed pasta 800 kg/hr  

SHORT PASTA LINE WITH TWO INDEPENDENT PACKING STATIONS                            

LINE 3 BRAIBANTI type COBRA 2.13, capacity 900 kg/hr (built 1989)                  

            Dimensions = L x W = 47.4 X 3.7 meters     

            H = between 3.7 - 5.5 meters at various stages

            Press (first 5.7 meters) : H = 7.1 meters

PACK 3      ROVEMA packing station 60X500 gr. packs/min with RICIARELLI                   

                  automatic weigher (built 1989) Stand-up packs in 3 sizes (all 500 grs).                     

                  Metal detector and CAMA automatic boxing machine 12X500 gr (1992).       

                  Final net capacity of packed and boxed pasta 1.800 kg/hr      

PACK 4      RICIARELLI packing station 35X500 gr/min (1987) with MARTINI weigher                 

                  (built 1991) and metal detector. Manually operated boxing station.              

                  Final net capacity of packed and boxed pasta 1.000  kg/hr.                

Additional:

Ten wooden 2 ton movable containers, with inside metal coating for storage of short pasta                 

AUXILIARY EQUIPMENT - INDEPENDENT MACHINERY                            

1) Semolina complete automatic intake-filling station for 5 silos (any size) comprising of mixers,                    

valves, pneumatic distributors, separate electrical control panel and 3 plan-shifters for production 3 line Manual bag discharge facility included. Manufacturer BUHLER (built 1990).                    

2) Complete Electrical FACTORY substation 1600 KVA, built 1989            

3) Boiler Room, with 4 Baltour crude-oil burners and 6 hot water boilers (built 1990 -2006)                  

4) Two 25 ton each oil tanks, built 1990                 

5) Compressed air station, manufacturer Ingersoll-Rand type SSR-ML37 (150 kW)                     

6) Vacuum Pump Station                  

7) Long & Short Pasta Die-Cleaning unit RICIARELLI LAVA type UNI/21 BR SERIE 3 AMTV AO 321                    

8) INK JET ICON IMAGE 12 & 14 SERIES S8 MASTER (bought 2002)                      

Offer 3050 : Food Packaging Plant

Offer 3048 : Lathe Machine

NO. 2 MULTIHEAD LATHE MACHINE
DIMENSIONS: LENGTH 320 CM X HEIGHT 150 CM X WIDTH 160 CM
6 HEADS
USED FOR MAKINK BODY OF SPARK PLUGS

NO. 1 LATHE MACHINE GILDEMEISTER MODEL AA32
USED FOR MAKING GEARS FOR STARTING MOTORS IN CAR

NO. 1 MULTIHEAD LATHE MACHINE ACME - GRI 23/8
6 HEADS
YEAR: ANTE 1996
DIMENSIONS: LENGTH 270 CM X 110 CM
USED FOR MAKING BODY OF SPARK PLUGS

NO. 1 MULTIHEAD LATHE MACHINE GILDEMEISTER MODEL AS/32
6 HEADS
YEAR: ANTE 1996
DIMENSIONS: LENGTH 380 CM X WIDTH 150 CM
USED FOR MAKING BODY OF SPARK PLUGS

NO. 1 MULTIHEAD LATHE MACHINE MAKE PITTLER
8 HEADS
YEAR: ANTE 1996
DIMENSIONS: LENGTH 500 CM X WIDTH 170 CM
NET WEIGHT: 14/15 Tons.
MACHINE IS VERY TALL - LOWERED BASE NEEDED
USED FOR MAKING STARTING MOTOR BODY CASE

NO. 1 MULTIHEAD LATHE MACHINE
6 HEADS
YEAR: ANTE 1996
USED FOR MAKING HYDRAULIC VALVES

NO. 1 TRANSFER LATHE MACHINE MAKE OLIVETTI
HORIZONTAL TABLE
YEAR: ANTE 1996
DIMENSIONS: LENGTH 210 CM X WIDTH 260 CM
6 DRILLING UNITS

NO. 1 TRANSFER LATHE MACHINE MAKE VIGEL
VERTICAL TABLE
YEAR: ANTE 1996
DIMENSIONS: LENGTH 290 CM X WIDTH 230 CM
6 POSITIONS - EACH POSITION 2 HOLDERS
3 DRILLING UNITS
COMPLETE WITH HYDRAULIC UNIT

NO. 1 TRANSFER LATHE MACHINE
VERTICAL TABLE
DIMENSIONS: LENGTH 230 CM X WIDTH 200 CM
6 POSITIONS
2 DRILLING UNITS + 1 TAPPING UNIT

Offer 3047 : Press

NO. 1 COLD METAL PRESSING MACHINE CEVA NF 54
YEAR: ANTE 1996
DIMENSIONS: LENGTH 270 CM X WIDTH 170 CM
4 POSITIONS
SIZE OF INPUT 8 MM

NO. 1  COLD METAL PRESSING MACHINE NATIONAL KAYSER
MODEL: NATIONAL ¼" - PU EBM
YEAR: ANTE 1996
DIMENSIONS: LENGTH 300 CM X WIDTH 170 CM
5 POSITIONS
SIZE OF INPUT 8 MM

NO. 1 COLD METAL PRESSING/ASSEMBLING MACHINE STAFIL 2S
DIMENSIONS: LENGTH 200 CM X WIDTH 100 CM
SINGLE SHOT
SIZE OF INPUT 5 MM
USED TO ASSEMBLE NICKEL AND COPPER
TO MAKE BIMETAL ELECTRODES FOR SPARK PLUGS

NO. 2 COLD METAL PRESSING MACHINES HUNGARIAN MAKE
YEAR: ANTE 1996
DIMENSIONS: LENGTH 300 CM X WIDTH 120 CM
4 POSITIONS
USED FOR MAKING PARTS OF DIESEL MOTOR

NO. 1 HYDRO PRESSING MACHINE MAKE EITEL GERMANY
YEAR: ANTE 1996
DIMENSIONS: LENGTH 140 CM X HEIGHT 240 CM X WIDTH 80 CM
TRAVERSE 250 MM
150 PIECES/HOUR

Offer 3029 : CNC

NO. 1 CNC WORK CENTRE MAKE FAMUP MODEL MCX50
year 1997
40 tools
700x500x450
change of bench pallet

Offer 3024 : LATHE MACHINES

NO. 1 COMPLETE WORKSHOP CONSISTING OF:
- 5 LATHES MACHINES 250X2000
- 2 SAW CUTTERS
- 2 TIGER MILLING TYPE 140X90

VARIOUS LATHES DIAM. 700,500 ETC

NO. 1 LATHE HORIZONTAL TYPE
DIAM. 700 LENGTH 3500
MAKE MELI ITALY

Offer 3010 : WOTAN MILLING

NO. 1 WOTAN 500 MILLING MACHINE FOR GEARS
12 modules, 800 diam,
year 1975.

Offer 3004 : Milling Machine

No 1 BED FLOOR TYPE MILLING MACHINE MAKE SIEMENS
mod. OVER, CNC SIEMENS 840 D, Automatic head, dimensions 8000x2000x1200 mm, 60 tools, table 2000x1700 mm run 1000 mm e table 1250x1100 mm (anno 1998)

Offer 01 : Radial Drilling Machine

No 1 Cespel Radial drilling